The Best Cheap Laser Engraver In 2022

If you are looking for an affordable laser engraver to start your business, then the best cheap laser engraver is the one for you. There are many different types and brands of laser engravers on the market, so it can be difficult to determine which is the best for your needs. The best cheap laser engraver is typically the one that is the most affordable, has a high-quality build, and offers a variety of features.

Our Top Picks At A Glance

If you don’t have enough time, check out this shortlist of the Best Cheap Laser Engraver and choose the one you like the most.

10 Best Cheap Laser Engraver You Should Consider In 2022

SaleBestseller No. 1
xTool D1 Laser Engraver with Rotary, 10W Higher Accuracy Laser Cutter, 60W Laser Cutter and Engraver Machine Support LightBurn, DIY Laser Engraver for Wood and Metal, Paper, Acrylic, 17'' x 16''
  • You May Be Wondering - 10W is laser output power, which measures the capability of the machine to cut and 60W is the machine power of the laser machine
  • Fulfill Your Imagination with One Pass - xTool D1 works well on cutting a 10mm wood board and a 5mm black acrylic in one pass, smoothly cutting surface with fewer burn marks
  • All-Metal Made - The all-steel wheel, shaft, and enclosed synchronous belt make the xTool D1 laser engraver more stable with less noise and 3 lifetimes longer than similar products
  • Higher Accuracy - xTool D1 laser cutter adopts a 0.08mm*0.06mm ultra-fine compression spot, achieving detailed and vivid engraving images
  • Wide Compatibility - xTool D1 supports LightBurn and Laserbox Basic (available on mobile devices). You can transfer data via Wi-Fi, USB cable, and TF card to use the laser engraver
Bestseller No. 2
Comgrow Laser Engrave Enclosure with Vent, Laser Engraving Machine Protective Cover with Eye Protection, Insulates Against Fumes and Odors for Laser Cutting Enclosure Tent for COMGO Z1
  • Great Compatibility: Comgrow laser engraver protective cover has a super space, 650*650*330mm/25.6*25.6*13in. it's fit for COMGO Z1, Ortur Laser Master 2/Laser Master 2 Pro, Sculpfun s9,xTool D1,ATOMSTACK A5/A5 Pro/A5 M40/A5 M30, Twotrees Totem 2.5/Totem 5.5/Totem S, etc.
  • More secure during engraving: The interior uses flame retardant material, can effectively stop burning. It can isolate the smoke and odor generated during the laser engraving process
  • Eyes protection design: laser engraving machine enclosure can diminish the blue light produced by laser engraving, protecting your eyes.
  • Quick and Easy Installation: Folding storage, easy to carry and assembly, stainless steel bracket, the overall more stable.
  • Enclosure Advantage: Sound insulation and dustproof. The cover can effectively block the noise emitted by the engraver during laser engraving, create a comfortable engraving environment. It can also be used as a dust cover to prevent the engraver from being covered by dust and is easy to store. Simply wipe it with a damp cloth when cleaning. Protects laser engraver from damage and helps contain stray fumes.
Bestseller No. 3
ORTUR Laser Rotary Roller, 360° Laser Engraver Y-axis Rotary Module for Engraving Cylindrical Objects Cans, 7 Adjustment Diameters, Min to 8mm, Compatible with Most Laser Engraving Machines
  • ✅【Cylindrical object carving】The rotary roller module can be used at cylinders or small diameter cylinders, such as round wood, cups, bottles, pipes, bowls, guitars, drums and tubes and over-length plate engraving or cutting.
  • ✅【7 Adjusted Diameters】Rotating the engraving axis can increase the original engraving area,The diameter can be adjusted in 7 steps,and the engraving diameter can be as small as 8mm, and up to 110mm, meets the engraving needs of different angles.
  • ✅【Easy to operate】link the engraving machine and the computer system, advanced new products, more intelligent.Use LaserGRBL or LightBurn (It's the most popular paid carving software in the world, very easy to use). Supports Windows XP, 7, 8, 10, Mac OS, and Linux.
  • ✅【Extensively Compatible】ORTUR Laser Rotary Rollers can compatible with other brands of engraving machines, NEED SWAP the blue and green wires at one end of the cable.
  • ✅【Quality and Assurance】We are ORTUR manufacturer. We provide the highest quality and comprehensive pre-sales and after-sales service. If you have any questions, please feel free to contact us.
SaleBestseller No. 4
SCULPFUN Laser Cutting Honeycomb Working Table Board for CO2 or Diode Laser Engraver Cutting Machine, for Slight Burnt & Smooth Edge Cutting, Visible Cut-Through, Table-Protecting, 300x200mm
  • Necessary Accessories for Laser Cutting: After using this laser cutting honeycomb table to cut wood, acrylic and other materials, the edges of the materials are neat and clean, not easily burnt by laser or yellowed by smoke, so you can get a nice cutting work.
  • Cutting Through Observable Design: We add 4 height increase pads for easy view. When the laser cuts through wood or acrylic, the metal plate at the bottom of the honeycomb will emit a bright light, which means that the cutting has penetrated. Solve the problem that ordinary engraving machine is difficult to judge whether cutting through.
  • High Quality Full-Metal Structure:SCULPFUN honeycomb table is made of metal, processed by high-precision CNC, it’s strong, stable, rust-proof, durable and high flatness.
  • Safe Metal Pad & Precise Scale Lines: Comes with a metal pad to protect the table from laser damage. A right angle measuring scale on the X and Y axes allows easy and quick measurement of the cutting object.
  • Wide Compatibility: Compatible with various laser engraving machines, such as diode DIY laser engraving machine and CO2 laser engraving machine.
SaleBestseller No. 5
LE400PRO Laser Engraver, 50W High Accuracy Laser Engraving Machine with 400x400mm Large Working Area, 5.5-6W Laser Power Engraver and Cutter for Wood, Metal, Acrylic, Leather
  • 𝐌𝐨𝐫𝐞 𝐏𝐫𝐞𝐜𝐢𝐬𝐞: LE400 Pro laser cutter and engraver adopts spot compression laser technology, and the laser focus spot is as fine as 0.08 x 0.08 mm, which makes the engraving and cutting effect very fine. The pre-assembled parts of the machine are carefully tuned to ensure the high precision of the laser's work.
  • 𝐄𝐲𝐞 𝐏𝐫𝐨𝐭𝐞𝐜𝐭𝐢𝐨𝐧 𝐃𝐞𝐬𝐢𝐠𝐧: The laser engraver machine is equipped with a laser protective cover protects your eyes without wearing goggles when you are engraving wood and metal, filter UV light for 97%. The laser protective cover adopts a humanized magnetic design, which makes the assembly easier and more convenient.
  • 𝐅𝐚𝐬𝐭 𝐅𝐨𝐜𝐮𝐬: The focal length of the laser is a fixed value, no need to adjust the focus before engraving which traditional zoom lasers can not do! And the laser power of the fixed-focus laser is more stable. What's more, the design of using the knob to control the lifting of the device makes focusing more convenient and accurate.
  • 𝐄𝐚𝐬𝐲 𝐭𝐨 𝐀𝐬𝐬𝐞𝐦𝐛𝐥𝐞: Full aluminum alloy modular can typically be assembled in 20 minutes. The structure makes the machine more solid, and improves the accuracy of engraving. Also equipped with a convenient power switch for easy power off at any time.
  • 𝐖𝐢𝐝𝐞 𝐂𝐨𝐦𝐩𝐚𝐭𝐢𝐛𝐢𝐥𝐢𝐭𝐲: The laser engraving machine can be compatible with LaserGRBL, LightBurn. LaserGRBL (free software) supports Win XP / Win 7 / Win 8 / XP / Win 10 / Win 11. LightBurn (paid software) supports Windows, Mac OS. Engraving file format supports NC, BMP, JPG, PNG, DXF, etc. In addition, we have a professional US technical team and support website to solve all your problems 7*24 hours
Bestseller No. 6
Creality 3D Printer Laser Engraver Module Ender 3 Laser Engraving Attachment 1.6W 12V/24V 450nm Blue-Violet Light, Magnetic Design, with Goggles and Wood Pieces, Upgrade for Ender 3/5 Pro, CR-10
  • Premium Laser Diode: Featuring reliability, high stability and high efficiency, the premium laser diode in this module allows for excellent laser beam quality.
  • Adjustable Focus: Users can adjust the focus by rotating the laser head according to the working distance to find the optimal spot size.
  • Fast Heat Dissipation: Equipped with a large aluminum heatsink, cooling DC fan, and an added hole to improve air flow, all of them contribute a fast and efficient heat dissipation, allowing for prolonged service life.
  • Easy to Use: Just clip the module magnetically to the print head, wire it to the motherboard, and installation is done. No firmware upgrade is needed.
  • Compatibility and Application: The laser module is compatible with Ender 3, Ender 3 Pro, Ender 3 Max, Ender 5 Series, CR-10 and printers with controllable fan ports. It can be used to engrave wood, leather, paper, and bamboo.
SaleBestseller No. 7
ATOMSTACK R3 Laser Rotary Roller, Laser Engraver Y-axis Rotary Roller Engraving Module for Engraving Cylindrical Objects Cans with 8 Angle Adjustment for Different Size
  • Easy to operate and install: This R3 laser rotary roller engraving module is pre-installed, no installation, no adjustment, ready to use after unpacking. link the engraving machine and the computer system, more intelligent.
  • Overall Optimization: The R3 Y-axis rotary roller has many humanized designs. Such as concentric design, adjustment-free timing belt; Closed design, the motor is not exposed, safer; Roller protruding design, no obstruction, unlimited length of engraved objects.
  • Adjusted Diameter: The diameter can be adjusted in 8 steps, and the engraving diameter can be as small as 4mm, and up to 100mm.
  • Object carving: The R3 rotary roller all-metal structures, safe and stable, and one-piece rubber roller, hardness up to 70A, stronger friction, more stable engraving process; can be used at longer cylinders, small diameter cylinders, over-length plate engraving, over-length plate cutting.
  • Perfectly compatible system: Use LaserGRBL or LightBurn (The linear speed is applicable to 95% of the engraving machines on the market, ). Supports Windows XP, 7, 8, 10, Mac OS, and Linux.
Bestseller No. 8
Comgrow Laser Engraving Machine for Dog Tag Metal Wood Silicone,Portable Desktop Laser Engraver Machine Tumblers Leather Glass Acrylic
  • 【MULTIPLE ENGRAVING MODES】The laser engraver machine has FOUR MODES that allow you to enjoy the fun of DIY crafting. ENGRAVE QUICK MODE CAN SAVE HALF OF YOUR TIME THAN OTHER MACHINES. The effect is obvious for sketch pictures or pictures with many lines. CARVE MODE is the normal black and white mode for normal engraving, BUT GRAY SCALE IS MUCH MORE DELICATE THAN THE CARVE MODE, mainly for some patterns with a color gradient, the software can control laser light power through the color gradient.
  • 【PERFECT APP AUXILIARY FUNCTIONS THROUGH BLUETOOTH】Do not know how to control our app and machine? we have detail user guide in APP to help you enjoy the laser engraving tool.It has the functions of text editing, photography, photo album, material library, eraser and manual resizing. Engraving mode: bitmap engraving, bitmap grayscale engraving, contour cutting, black and white image, grayscale image, stamp. Operating system: Windows, Android, iOS (computer software can be compatible with Mac OS)
  • 【STRONG COMPACT LASER ENGRAVING CUTTING MACHINE】 1600mw German OSRAM unique laser chip Mini laser Carving Tool for metal cups. The output power of the laser head is stable and can work continuously for more than 10,000 hours. The engraving depth reaches 2mm, the engraving range: 3.8“*3.4“, the laser engraving range: 30mm-80mm, and the engraving resolution: 508dpi. Engraving materials include: cardboard, wood, leather, cloth, bamboo, plastic, acrylic, cut 1mm wood (Note: acrylic, glass, ceramic and transparent or translucent stuff can not be engraved. You need to use the included black marker to blacken the object, or you can buy our laser engraved colored paper ASIN:B09H44ZFVJ)
  • 【EXCELLENT SAFETY PROTECTION】The pet tag engraver machine will stop working if the engraving cutting machine slant over 30 degree. A gyroscope is added to the engraving machine, which can automatically stop engraving when any abnormal movement occurs. After restoring the position, you can click the APP to continue carving. The bracket of the laser engraving machine and goggles can protect the eyes. The aluminum base can prevent the engraving machine from burning down the bottom of the desktop.
  • 【COMPREHENSIVE AFTER-SALE SERVICE】Comgrow wood engraving machine tool offer exhaustive after-sale service, you can search "Comgrow" through Facebook, Youtube, Twitter, Instagram and google to find out our brand page, will easily find out our Comgrow brand page you can get more professional DIY skills from our video operation guidance but also can join our team to share every moment you work with our products with others.
Bestseller No. 9
ATOMSTACK A5 Pro Laser Engraver, 40W Laser Engraving Cutting Machine for Wood, 5W-5.5W Output Power, Compressed Spot CNC Carving DIY Laser Master, Eye Protection Fixed-Focus, 400x410mm
  • First Choice for Creative: Atomstack laser engraving machine can engrave various materials like metal, wood, bamboo, plastic, leather PCB board, aluminum oxide, lacquered metal, etc. You can create your own engraved work for your favorites, realize your imagination.
  • Excellent Laser Engraving Technology: A5 Pro laser cutter with 5~5.5w output power with 0.19mm ultra-fine compression laser focus area, the engraving accuracy reaches 0.01mm, which makes more refined engraving process, it makes easy cut on wood and acrylic.
  • 180° Panoramic Visible:UV filter-retardant acrylic on laser module can filter 97% of the ultraviolet light, protecting your eyes and people around you,and special design with 180° panoramic viewing area, can be enjoy to watching your artworks producing.
  • High-Performance Structure Design: Atomstack A5 40W machine design with integrated screw rod which can make the fastest running speed reach 11000/min, It is more stable and agile when engraving complex patterns, making it easier for you to achieve better results.
  • Extensive Compatibility: The machine can be compatible with various mature engraving software, such as LaserGRBL(free), LightBurn(paid), LaserGRBL support Windows XP/7/8/10/11, and LightBurn support Mac OS and windows, engraving file format support NC, BMP, JPG, PNG, DXF etc.
Bestseller No. 10
SCULPFUN Laser Engraver Enclosure with Vent, Fireproof and Dustproof Protective Cover for Most Laser Engraving Machine, Insulates Against Smoke and Odor, Noise Reduction, Eye Protection, 700x700x460mm
  • Advanced Fireproof Technology: SCULPFUN enclosure is made of high quality fire retardant plexiglass fiber with double-side silicone coating which stands up the temperature up to 1000 degrees. If you can burn through it with a lighter within 5 minutes, we guarantee a full refund. Maximum isolation from fire hazards.
  • Smoke & Odor Insulation and Noise Reduction: Enclosed design isolates fumes, burning odors and noises generated during the work of the engraving machine. Then use the extractor fan to exhaust the smoke and odors, soundproofing materials are also effective in reducing noise. Protect your safety and health from smoke, noise, and pungent odors, giving you a more comfortable engraving experience.
  • Larger Size & Highly Compatible: SCULPFUN laser engraver enclosure has a super large space of 27.5*27.5*18 inch( 700x700x460mm). Compatible with most engraving machines on the market, such as fiber/co2/k40 laser engraver, as long as the size is within this range. The higher design also allows for the placement of rollers to meet your needs.
  • Sturdy Construction & Eyes Protection: Made from water-proof fabric tiers, high quality steel tube and reinforced connectors. Zippered dustproof cover offered to keep your machine away from dust and easy to clean. The viewing window is made of blue light filtering PVC, protect your eyes without wearing goggles.
  • Easy Installation and Portable: Comes with clearly installation instructions, you will have it assembled in minutes, easy to put together and you don’t need special tools or skills. Folding storage, space-saving, lightweight, easy to carry.

What To Look For Choosing The Best Cheap Laser Engraver

Take the following considerations into account to choose the Best Cheap Laser Engraver that meets your needs.

Before buying a laser engraver, it is important to understand the different types of engravers and what features they offer. Additionally, it is helpful to know what type of paper you will be using and the size of the prints you will be making. Finally, it is important to decide which laser engraver is right for you and your needs.

Related Frequently Asked Questions

What Is The Easiest Laser Engraver To Use?

The Laser Engraver can be used by anyone, as it is one of the simplest machines to use.

How Much Does A Good Laser Engraver Cost?

If you are looking to get a good laser engraver, the cost can range from around $100 to more than $4000.

Are Laser Engravers Worth It?

There is no one-size-fits-all answer to this question, as the cost of a laser engraver will vary depending on the type of engraving desired and the quality of the equipment used. However, some people feel that laser engraving is worth the price, as it offers a more accurate and detailed result than traditional printing methods.

What Is A Good Laser Engraver For Wood?

A good laser engraver for wood is one that can be used for a variety of tasks, including drawing and cutting.

Final Thoughts

Prices There is no single answer to this question since the best laser engravers vary in price, size, and features. It is important to find an engraver that is right for your needs and has matching prices with other related products.

Leave a Comment

Your email address will not be published.